6.2.15. Final collector


1. Disconnect the socket of the sensor of exhaust gases from conducting.
2. Turn off bolts and remove a collector casing.
3. Turn off a nut of the union and pick up the recirculation phone.
4. Include on the emergency brake and lift a forward part of the car.
5. Turn off nuts and a bolt and remove a reception exhaust pipe, remove laying.
6. Turn off nuts and bolts of fastening of a final collector to a head of the block of cylinders in the return sequence.
7. Remove a collector and laying.


1. Installation is carried out upside-down.
2. Before assembly replace all laying, having carefully cleared the demountable planes, replace or restore the damaged hairpins.
3. Tighten bolts and nuts a dynamometer key in the specified sequence.