65637bd9


6.4.2.6.1. The operating electromagnetic valve


The operating electromagnetic valve is installed on the left side of an inlet collector.

Replacement

PERFORMANCE ORDER
1. The operating electromagnetic valve is installed on the left side of an inlet collector.
2. For replacement of the electromagnetic valve disconnect a wire of the negative plug of the accumulator. Then, squeeze a fixing clip and disconnect the socket of connection of the valve.
3. Remember the provision of installation everything hoses on the valve. Not to mix them at installation, mark each of hoses and branch pipes at removal.
4. Release collars (if are established) and disconnect hoses from the valve.
5. Remove the valve from a fixing arm and get it from a motive compartment.
6. Installation is carried out upside-down removals. At installation check correctness of connection of hoses.
7. If the valve does not work as it was expected, so it is faulty, and it needs to be replaced.