Nissan:: Sunny:: System of launch of the engine

7.4. System of launch of the engine

If the starter does not join at turn of a key in the ignition lock, then it can be caused by the following reasons:

  – the battery is faulty;
  – pollution of contacts of power wires (starter and traction relay);
  – the traction relay is faulty;
  – the starter is faulty.

Check

PERFORMANCE ORDER

1. Check the battery, having turned on driving beam of headlights.

2. At dim light of headlights check and charge (or replace) the battery.

3. At bright light of headlights include a starter and if headlights prigasat, then the starter is faulty.

4. If headlights continue to burn, but the click is not heard, then the traction relay or a chain of its food is faulty.

5. At weak rotation of a starter and the serviceable battery it is faulty or a starter, or resistance of a chain of its food increased.

6. At suspicion on bad condition of a chain disconnect all wires and smooth out contacts, including the tire of connection of the engine with a weight, establish wires into place.

7. If the battery and wires in satisfactory condition, then check whether tension on the traction relay moves.

8. For this purpose disconnect a wire from flat contact of the relay and through a lamp or the voltmeter connect to weight.

9. Turn the ignition key.

10. If tension on the relay moves, then the chain is serviceable, otherwise check wires (cm. subsection 14.2.1).

11. Check power contacts of a starter on the traction relay, having connected to them a lamp or the voltmeter.

12. If at inclusion of a starter the lamp does not burn (or not tension), then the traction relay should be replaced.

13. If the chain and the relay are serviceable, then the starter is recommended to be replaced.