1.8. Ignition switch and lock of ignition
The ignition lock with the anti-theft device
Carburetor engine
"START" – joins a starter. Before launch of the engine establish a control lever of the automatic transmission in a position "P" or "N", and at the mechanical transmission establish in a position of idling and hold a pedal of coupling pressed. Right after the engine was started, release a key. It comes back in a position of "ON". Include a starter no more than on 15 pages.
Position of "ON" – the engine and all consumers of electric current are included.
It is a usual position of the switch for the mode of the movement. It is not necessary to leave a key in a position of "ON" if the engine does not function. Otherwise the accumulator is discharged and there can be violations in system of ignition.
Position of "ASS" – consumers of the electric power as, for example, radio, work, but the engine is switched-off.
Position of "LOCK" – the steering wheel is blocked. The key can be extended only in this situation.
For turn of the ignition key from a position of "ASS" in a position of "LOCK" it is necessary to press it at first inside. If at launch of the engine the key jams in a position of "LOCK", check whether the key is completely inserted. Then carefully rotate a key, turning a wheel there and back. When the car is in the movement, do not press a key, do not turn in a position of "ASS", do not extend as all these actions block a wheel and do not give the chance to operate the vehicle. If it is necessary to switch-off the engine when the car is in the movement, it is allowed to turn a key only to a position of "ASS". Do not press a key at all and do not extend it.
Diesel engine
The position of "ON" serves for inclusion of kalilny candles and a prestarting warming up of the engine. After the engine was started, the key comes back to this position and all power consumers are in working order.
When the key turns in a position of "ON", the indicator bulb of kalilny candles flashes. The bulb dies away when kalilny candles warmed the engine to such an extent that it was started. It is a usual position of the switch for the mode of the movement. In order to avoid a discharge of the accumulator it is not necessary to leave a key in a position of "ON" if the engine does not function.
The START position – joins a starter.
Before launch of the engine install the lever of switching in an idling position, squeeze out a coupling pedal. Right after the engine was started, release a key. It comes back in a position of "ON". Let's a starter work with He more, than 30 pages.
Position of "ASS" – such power consumers as radio, in working order, but the engine is switched-off.
"LOCK" – a steering wheel is blocked. The key can be extended only in this situation.