2.1. Specifications
The recommended lubricants and liquids – see subsection 1.12.7.
Filling capacities (l)
| Oil for the engine |
3,2
|
| Cooling system: |
| – cars from the manual transmission
|
5,5
|
| – cars with automatic transmission |
5,9
|
Transmission
| Manual transmission, engine of 1,4 l |
2,8
|
| Manual transmission, engine of 1,6 l |
2,9
|
| All cars with automatic transmission |
7,0
|
| Liquid volume in the power steering |
1,0
|
| Fuel tank |
50
|
| Oil filter |
| Liquid freezing point in the cooling system: |
| – 28% – antifreeze |
- 15 °C
|
| – 50% – antifreeze |
- 30 °C
|
Fuel system
| The filtering element of the air filter |
| Carburetor engines |
Champion W247 type
|
| Engines with fuel injection: |
| – engine of 1,4 l |
Champion type (non-demountable)
|
| – engine of 1,6 l |
Champion U548 type
|
| Fuel filter: |
| – carburetor engines |
Champion L110 type
|
| – engines with fuel injection |
Champion L215 type
|
| Idling turns: |
| – carburetor engines from the manual transmission |
750 (± 50) rpm
|
| – engines with injection of fuel from the manual transmission |
700 (± 50) rpm
|
| – carburetor engines from the automatic transmission |
850 (± 50) rpm
|
| – carburetor engines from the automatic transmission |
800 (± 50) rpm
|
| Contents WITH: |
| – without converter |
1,5 (± 0,5) %
|
| – with converter |
not higher than 0,5% (are not regulated)
|
System of ignition
| Ignition moment (idling) |
| Carburetor engines |
| GA14DS (at the disconnected hoses of the vacuum regulator and recirculation) |
0 ± 2 to VMT
|
| GA14DS (hoses of the vacuum regulator and recirculation are attached) |
10 ± 5 to VMT
|
| GA16DS (at the disconnected hoses of the vacuum regulator and recirculation) |
2 ± 2 to VMT
|
| GA16DS (hoses of the vacuum regulator and recirculation are attached) |
10 ± 5 to VMT
|
| Engines with fuel injection |
10 ± 2 to VMT
|
| Type of spark plugs: |
| – carburetor GA16DS engines |
Champion RC7YCC4 or RC7YC4 type
|
| – other engines |
Champion RC9YCC4 or RC9YC4 type
|
|
Gap between electrodes |
1,1 mm
|
Brakes
| Extreme thickness of overlays of disk brakes |
2,0 mm
|
| Extreme thickness of overlays of drum brakes |
1,5 mm
|
| Deflection of belts of the drive of hinged units (mm): |
| – generator and pump of the hydraulic booster |
7 – 9, limit – 11
|
| – the generator without pump of the hydraulic booster |
7 – 9, limit – 10
|
| – conditioner compressor |
6 – 8, limit – 9,5
|
| – pump of the hydraulic booster |
4 – 6, limit – 7,5
|
Prevention
The deflection of a belt is measured at effort of 10 kgfs (see the text), for a new belt value should be reduced by 1 mm.
Inhaling moments (N. of m)
| Engine pallet |
34
|
| Spark plugs |
25
|
| Nut of a roller of a natyazhitel of a belt of the conditioner |
28
|
| Drain stopper of the block of cylinders |
40
|
| Nuts of wheels |
108
|
| Bolts of fastening of seat belts |
50
|
| Check point traffic jams: |
| – control opening |
29
|
| – drain |
29
|
| – drain stopper of automatic transmission |
34
|
