6.1.13. Final collector

Final collector on cars with converter

1. Hose of selection of hot air

2. Recirculation tube

3. Socket of the sensor of exhaust gases

4. Tube of selection of exhaust gases


1. Disconnect from a collector and remove a hose.
2. On cars with converter disconnect wires of the sensor of exhaust gases.
3. Turn off the union and disconnect all tubes from a collector.
4. Turn off bolts and remove a collector casing.
5. Include on the emergency brake and lift a forward part of the car.
6. Turn off nuts and a bolt and remove a reception exhaust pipe, remove laying.
7. Turn off nuts and bolts of fastening of a final collector to a head of the block of cylinders, remove a collector from hairpins, remove laying.


1. Installation is carried out upside-down.
2. Before assembly replace all laying, having carefully cleared the demountable planes, replace or restore the damaged hairpins.
3. Tighten bolts and nuts a dynamometer key.