65637bd9

6.3.1.2. Air filter

Removal

PERFORMANCE ORDER
1. Turn off and remove a bolt, and disconnect an air admission tube sideways of a casing of the air filter.
2. Turn off nuts of fastening of a cover of the air filter, then, release fixing clips and uncover.
3. Remove the filtering element.
4. Remove washers and elastic bands from bolts of a casing of the air filter, then, remove a fixing frame and consolidation.
5. Turn off and remove the remaining fixing bolts of a casing of the air filter, and get a casing from a motive compartment.
6. Disconnect all vacuum and air hoses from a casing of the air filter, having remembered or having marked the provision of their installation.
7. Then, it is possible to pick up the inlet phone and the resonator after all their fixing bolts are turned off. If it is necessary, the inlet tube can be disconnected from the resonator.
8. Examine plugs of fastenings and consolidation on existence of damages or wear tracks and replace them if it is necessary.

Installation

PERFORMANCE ORDER
Installation is carried out upside-down removals. Check that all air ducts and hoses were correctly connected and were not pressed at installation of a casing of the air filter.