65637bd9

6.3.2.11.2. Fuel pressure regulator


Prevention

You watch precautionary measures in subsection 6.3.2 before work.


Removal and installation

PERFORMANCE ORDER
1. Disconnect a negative wire of the rechargeable battery.
2. Disconnect a vacuum hose from the fuel pressure regulator (it is specified by an arrow), which is installed on the left side of a fuel collector.
3. Release pressure from fuel system, being guided by the instructions provided in subsection 6.3.2.6. Release a collar and disconnect a fuel hose from below of the fuel pressure regulator.
4. Turn off two fixing bolts and remove the regulator from a fuel collector. Remove the sealing ring established on the regulator, and you will throw out it – at installation it is necessary to use new.
5. Installation is carried out upside-down removals. At installation use a new sealing ring. Upon completion of installation start the engine and check whether there is no fuel leak.