65637bd9 Pritivodavleniye valve

Counter-pressure valve elements – models with the 1,6 l engine (other models are similar)

1. Vacuum tube

2. Fixing nuts


1. The valve of counter-pressure is installed on the left side of an inlet collector. If it is necessary, remove a casing of the air filter for improvement of access to the valve.
2. Disconnect both vacuum hoses from above of the valve.
3. Turn off two fixing bolts and remove the valve from an inlet collector, having disconnected it from a pipe of the exhaust system.
4. Installation is carried out upside-down removals.