65637bd9



8.2. Coupling adjustment


Adjustment of height of a pedal of coupling

 H. Pedal height

A. Free wheeling of a pedal of coupling

1. Arm

2. Lock-nut

3. Adjusting bolt

4. Rug

5. Waterproofing

6. Antinoise slip

7. Floor

Adjustment comes down to check and exposure of height and a free wheeling of a pedal.

PERFORMANCE ORDER
1. Having removed a rug in the driver's legs, measure distance from a body floor to a pedal.
2. If the distance to a rug is measured, then to result add rug thickness.
3. If the distance differs from standard, then turn off a lock-nut of an adjusting bolt (or the coupling switching off sensor) and rotate a bolt (or the sensor) before receiving the necessary distance.
4. After adjustment tighten a nut with the set moment.
5. For expansion of space remove the lower forward panel.
6. Check a free wheeling of a pedal.
7. Press a pedal a finger and measure distance to feeling of weakness in resistance to movement.
8. In need of adjustment release a cable lock-nut on the coupling switching off fork lever (working in a motor compartment) and rotating a nut with a nakatka, adjust the lever course to norm (2,5–3,5 mm).
9. Again check a free wheeling of a pedal and tighten a lock-nut.
10. Establish all removed details.