8.3. Coupling cable

The lever is in the top part of transmission.


1. Find a cable of coupling and release a lock-nut of a cover of a cable and an adjusting nut with a corrugated wreath.
2. Unhook a cable and get a cable cover from an arm.
3. In salon disconnect a cable from a pedal what it can be necessary for to remove the forward panel.
4. Stretch a cable through a partition of a motor compartment, it is also possible to turn off two bolts of fastening of the holder of a cover and to remove the holder together with a cable.
5. Unbend brackets and get a cable.
6. Check existence on a cable of wear tracks and damages.
7. Check freedom of movement of a cable in a cover. Keep in mind that at installation into place the cable can jam, despite the seeming ease of its movement in completely straightened state.


1. Grease tips of a cable and pass through a partition.
2. Fix the holder of a cover.
3. Dress a cable on a pedal.
4. Lay a cable and fix by brackets.
5. Dress a cable on the lever of a fork and adjust a coupling pedal.