65637bd9



9.2.8. Overload switch

Check

PERFORMANCE ORDER
1. Remove the central section of the forward panel.
2. Disconnect wires from the switch of an overload and a control lamp.
3. Check resistance between conclusions 1 and 2. In the switched-off state between these conclusions there has to be a short circuit.
4. Otherwise replace the switch.

Removal

PERFORMANCE ORDER
1. Remove the central section of the forward panel.
2. Disconnect sockets from the switch of an overload and a control lamp.
3. Unscrew screws, wring out the button and remove the selector handle.
4. Get the switch from latches.

Installation

PERFORMANCE ORDER
1. Install the switch.
2. Correct conducting and dress the handle.
3. Tighten screws and check fixing of the selector.
4. Attach sockets of the switch of an overload and control lamp, establish the central section.