9.1.2. Mechanism of change of transfers


1. Remove the central section of the forward panel.
2. Lift a forward part of the car and establish on supports.
3. Unhook a spring of a rod of inclusion of transfers.
4. Turn off nuts and get bolts of axes of a rod from the check point and the lever.
5. Disconnect a rod from an arm at the check point, turn off nuts and disconnect a rod arm from the bottom and get a rod with an arm.
6. Remove a bracket, get a check point control lever, remove a small cover in the lever basis.
7. If necessary turn off nuts, remove a cover frame, get a bracket and remove a cover.
8. Check a condition of details, especially plugs of an axis and the hinge of a rod, replace worn-out covers.


1. Installation is carried out upside-down.
2. Grease with jellied lubricant of the plug and a rod axis.
3. Tighten nuts and bolts with the set moment.