65637bd9



14:18. Antenna

Removal and installation

PERFORMANCE ORDER
The antenna which is built in in back glass
1. Such antenna is installed on a part of cars and is combined with a glass heater. In case of suspicion on malfunction address to service of car service.
The antenna mounted on a back wing
2. Disconnect the battery from weight.
3. Remove a luggage carrier rug.
4. Get latches and remove an overlay of a rug.
5. Disconnect the socket from the antenna electric drive through an aperture in the body panel.
6. Disconnect antennas from a body.
7. Disconnect a wire from the antenna, get from a bracket a wire on weight.
8. Turn off a nut of fastening of a mast of the antenna.
9. Unscrew two screws of fastening of the antenna to a body.
10. Get the antenna and disconnect a drainage hose.
11. Install the antenna upside-down. Tighten screws only after tightening of a nut of a mast.
The antenna mounted on a roof
12. Unscrew outside two screws, get the antenna and disconnect a wire.
13. Install the antenna upside-down.
The antenna in the top part of a windshield
14. Unscrew outside two screws, get the antenna and disconnect a wire.
15. Install the antenna upside-down. Densely tighten screws.