65637bd9

14.5. Lamps of external lighting

New lamps have to correspond to replaced completely. When replacing be convinced of purity and reliability of contacts.

Replacement

PERFORMANCE ORDER
Headlights
1. Open a cowl
2. Press latches and disconnect the socket.
3. Uncover, having turned counterclockwise.
4. Remove a rubber cover.
5. Get the holder of a lamp, having pressed on a latch.
6. Get a lamp.
7. You hold a new lamp only through a pure napkin, without touching by fingers.
8. Establish a new lamp so. that the ledge of the holder came into dredging in the headlight case. Dress a cover an inscription up and attach the socket.
Dimensional lamp
1. Open a cowl
2. Press latches and disconnect the socket.
3. Get the holder of a lamp, having turned counterclockwise.
4. Get a lamp from the holder.
5. Insert a new lamp and establish upside-down.
Index of turn
1. Open a cowl and unscrew screws of a plafond of the index of turn in its top external part.
2. Disconnect the lower hinge and hook and carefully get a plafond from a wing.
3. Get the holder of a lamp, having turned counterclockwise.
4. The lamp fastens in the holder bayonetny connection.
5. Establish a new lamp upside-down. At installation track that the ledge on a plafond came into a body opening.
Repeater of turns
1. Displace a plafond forward and disconnect from the wing panel.
2. Get a plafond, turn out the holder counterclockwise.
3. Get a lamp, having pulled from the holder.
4. Establish a new lamp upside-down.
Searchlight
1. Unscrew two screws of fastening of a searchlight, do not touch adjusting screws.
2. Get a searchlight, remove a back cover, having turned counterclockwise.
3. Get a lock ring and a lamp, disconnect the socket.
4. Undertake a lamp only through a pure napkin.
5. Insert a new lamp, having combined a ledge and dredging in a plafond.
6. Fix a lamp by a lock ring, attach the socket.
7. Wrap a cover, establish a plafond and wrap screws.
Forward fog lights
1. Unscrew two screws, do not touch screws of adjustment of a bunch.
2. Disconnect the socket, get a lock ring and a lamp.
3. Establish a lamp upside-down.
Back combination of lamps
1. Open a trunk lid (a cargo compartment).
2. Get a latch and open the hatch in a back slip.
3. Get the holder of lamps.
4. Lamps fasten in the holder bayonetny connection.
5. Replace a lamp and establish the holder upside-down. On a braking signal lamp / a dimensional lamp adjusting lugs are provided.
Lighting lamp of registration plate
1. Unscrew two screws and get a plafond from a back cover.
2. Pull and get a lamp.
3. Establish a new lamp upside-down.