65637bd9



7.7.4. Ignition distributor

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect latches, unscrew screws.
3. Uncover.
4. Remove laying.
5. Disconnect the socket.
6. Disconnect hoses from the vacuum regulator.
7. Designate position of the distributor concerning a head of cylinders.
8. Turn off two bolts and remove the distributor.

Installation

PERFORMANCE ORDER
1. Replace a sealing ring of a shaft, check a condition of a cover.
2. Insert the distributor, having combined a spline on a shaft with a groove in a nest on a head of cylinders (the arrow specified a sealant).
3. Combine the put tags (shooter) and slightly tighten bolts.
4. Establish laying of a cover.
5. Tighten cover screws.
6. Attach wires and hoses.
7. Check installation of ignition and if necessary adjust, tighten distributor bolts.