2.4.6. Replacement of transmission liquid in automatic transmission

1. Make a short trip to warm liquid up to the working temperature.
2. Park the car on a plain surface, put on the emergency brake and switch off ignition. For expansion of working space lift a forward part of the car and establish on supports.
3. Get the probe of the measuring instrument of level and substitute a vessel of suitable volume under transmission.
4. Turn off a drain stopper in the pallet of transmission and merge liquid in a vessel, having taken measures not to get burn. Carefully clear a stopper of a drain opening, having removed metal particles from magnetic inserts. Laying of a stopper after its otvorachivaniye is subject to replacement.
5. After running off of liquid clear carvings on traffic jams and in the transmission pallet, tighten a drain stopper with the set moment. Lower the car.
6. Fill in liquid through a level measuring instrument branch pipe in the small portions, having inserted a funnel with the thin metal gauze. Before check of level it is necessary to wait a long time that liquid completely flew down. Keep in mind that during check of level of transmission liquid the car has to be on a flat plain surface.
7. After the level of liquid reached point MOVE in the probe, insert the probe into a branch pipe and start the engine. Several minutes of work later idling stop the engine and again check liquid level. If necessary add.
8. Make a short trip that liquid was evenly distributed on the internal volume of transmission, then again check level (see subsection 2.2.6).