65637bd9

11:13. Amplifier of brakes and backpressure valve

THE AMPLIFIER OF BRAKES WITH THE BUILT-IN VALVE

The valve is inserted into a forward part of the case of the amplifier.

Removal

PERFORMANCE ORDER
1. Weaken a collar and disconnect a hose from the valve.
2. Get the valve from a rubber sealant, turning in different directions and giving on itself.
3. Get a sealant.

Check

PERFORMANCE ORDER
1. Check a condition of the valve, the valve has to be blown in one direction.
2. If necessary replace the valve.
3. In the presence of damages replace a sealant.

Installation

PERFORMANCE ORDER
1. Install a sealant in the case of the amplifier.
2. Carefully insert the valve, without having damaged a cover.
3. Attach a hose.
4. Start the engine and be convinced of lack of a leak of the backpressure valve.

THE AMPLIFIER WITH THE TAKEN-OUT VALVE

The valve is built in to the vacuum highway and fixed on a body by a bracket.

Removal

PERFORMANCE ORDER
1. Get the valve from a bracket.
2. The arrow on the valve has to be directed towards the hose attached to the soaking-up collector.
3. Weaken a collar and disconnect hoses from the valve.

Check

See above.

Installation

PERFORMANCE ORDER
1. The valve is installed upside-down.
2. Start the engine and be convinced of lack of a leak in connections of hoses and the valve.