65637bd9

12:10. Switch of ignition and lock of blocking of a steering column

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove overlays of a steering column (cm. subsection 13.26).
3. Disconnect the socket from the ignition switch, unscrew the screw without head in a back part of the switch and remove the switch.
4. For removal of the blocking lock assembled with the switch of ignition drill two srezny screws (are specified by shooters) and remove both half of the lock from a column. The blocking lock has a non-demountable design.
5. Assembly is carried out upside-down.
6. Wrap new screws and tighten to an oblamyvaniye of heads.