12:14. Hydraulic actuator

It is necessary to remove air from a hydraulic actuator in case of bubbles in a tank when clicks and the increased noise during the operation of the pump are listened.

At slow turn of a wheel or the rectilinear movement work of a hydraulic actuator is followed by the hissing sound which emergence is not the basis for pumping of a hydraulic actuator.

Removal of air from a hydraulic actuator

1. Lift a forward part of the car and establish on supports.
2. Check and if necessary restore liquid level in a tank.
3. Ask the assistant to rotate a wheel in both parties against the stop and watch liquid level.
4. When falling level add.
5. Repeat these actions until level does not cease to fall. Otherwise in system there is a leak.
6. Start the engine and repeat the procedure.
7. After stabilization of level lower the car.