13:15. Cover of a cargo compartment (compartment and hatchback)

Removal and installation

1. Lift a cover and record a prop.
2. On cars a compartment and the 5-door hatchback release a lock-nut, turn out a hairpin of the hinge and remove the hinge.
3. On the 3-door hatchback turn off two bolts of an arm.
4. Slightly press a rack and, without allowing to be straightened, remove a rack from a cover.
5. Turn off bolts and disconnect a rack from a body.
6. Establish a rack upside-down.
Cover of a cargo compartment
1. Disconnect the battery from weight.
2. Remove the internal panel of a cover.
3. Disconnect and designate all sockets.
4. Extend sockets and conducting from a cover, having bound for a cord and having got a through sealant. Leave a cord in a cover.
5. Disconnect a hose from a windscreen washer nozzle, get a hose, having bound for a cord.
7. Ask the assistant to hold a cover.
8. Designate the provision of loops concerning a cover.
9. Disconnect a rack from a cover.
10. Turn off bolts and uncover.
11. Establish a cover upside-down.
12. you rotyanit conducting and a hose in a cover, having attached to a cord.
13. Do not tighten bolts of loops.


1. Carefully close a cover and check gaps between a cover and the next panels. The cover is regulated by movement in openings of loops at the released bolts. After adjustment tighten bolts.
2. Check operation of the lock of a cover, if necessary adjust movement at the released bolts which after adjustment tighten.