65637bd9



13.6. Rear bumper

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and establish on supports.
Cars sedan and hatchback
2. Unscrew 2 screws of fastening of overlays of a bumper to a back wing (a photo at the left) and the screw of fastening of a slip to an edge of a wheel arch (a photo on the right).
3. Working in a luggage carrier, lift rugs, get caps (a photo at the left) and turn off 2 bolts of fastening of arms of a bumper to the bottom (a photo on the right).
4. Remove a bumper (a photo at the left) and arms (a photo on the right).
5. If necessary the overlay of a bumper can be removed separately, having disconnected latches.
Cars with a compartment body
6. Remove registration plate and an arm.
7. Unscrew screws of fastening of overlays of a bumper on edges of back wheel niches.
8. Get latches and remove the lower part of an overlay of a bumper.
9. From a cargo compartment turn off bolts of fastening of sidewalls of a bumper to wings.

10. From a cargo compartment turn off nuts of fastening of the top part of a bumper to a body.
11. For access to bolts get caps on corners of a cargo compartment.
12. Turn off bolts, put forward a bumper, disconnect the socket of illumination of a sign and remove a bumper.

Installation

The bumper is established upside-down.