65637bd9



3.1.1.16. Engine mount details


Engine mount details
1. Right support.
2. Right arm.
3. Forward support.
4. Back support.
5. Longeron.
6. A forward support (for the manual transmission).
7. The torsion (for the manual transmission).

Check

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Check existence on support of a suspension bracket of cracks, hardenings, peelings of rubber from a metal basis. At detection at least and the specified damages of a support replace one.
3. A dynamometer key check an inhaling of all threaded connections of support.
4. Check wear of support for what shake the engine or a support. If in support the big side play is found, then replace worn-out details, previously having checked an inhaling of bolts and nuts.

Replacement

RIGHT SUPPORT

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Raise the engine a jack.
3. Turn off three bolts and remove an arm of the right support.
4. Turn off a nut, a coupling bolt and three bolts, remove the right support. Get rubber pillows.
5. If necessary turn off bolts and remove an arm of the right support.
6. Carefully check existence of signs of wear or destructions on all details of a support, replace worn-out details.
7. Establish an arm, tighten bolts.
8. Establish rubber pillows, be convinced that probes of pillows came into the corresponding openings of an arm. Establish a support, tighten bolts with the set moment.
9. Combine a support with a body arm, insert a coupling bolt and tighten a nut with the set moment. Remove a jack.
10. Establish the top arm of the right support and tighten bolts of fastening of an arm with the set moment.
11. Connect the battery to weight.

LEFT SUPPORT

PERFORMANCE ORDER
1. Remove the battery (see subsection 7.2).
2. Raise the engine a jack.
3. Turn off a nut, a coupling bolt and three bolts of fastening, remove the right support. Get rubber pillows.
4. Carefully check existence of signs of wear or destructions on all details of a support, replace worn-out details.
5. Establish an arm, tighten bolts.
6. Establish rubber pillows, be convinced that probes of pillows came into the corresponding openings of an arm, establish a support. Tighten bolts of fastening of an arm to the check point with the set moment.
7. Combine the left support with an arm, insert and tighten a coupling bolt.
8. Remove a jack, install the battery.

FORWARD SUPPORT

PERFORMANCE ORDER
1. Put the car on the emergency brake, lift a forward part of the car and establish on supports. Disconnect the battery from weight.
2. On cars from the manual transmission note the provision of a coupling bolt of a forward support on an arm.
3. Raise the engine a jack.
4. Turn off a nut and get a coupling bolt.
5. Turn off bolts and remove an arm of a forward support.
6. Carefully check existence of signs of wear or destructions on all details of a support, in need of a detail replace. On cars from the manual transmission a pillow from the central longeron (if necessary) also establish to a vypressuyta a new pillow, having moistened with soap solution.
7. Install an arm on the engine, tighten bolts with the set moment.
8. Insert a coupling bolt of a support, slightly tighten a nut. Orient the power unit so that the coupling bolt was precisely combined with the tag put before removal tighten a coupling bolt with the set moment.
9. Remove a jack.
10. Lower the car, connect the battery to weight.

BACK SUPPORT

PERFORMANCE ORDER
1. Put the car on the emergency brake, lift a forward part of the car and establish on supports. Disconnect the battery from weight.
2. Turn off a nut and get a coupling bolt.
3. Turn off bolts and remove an arm of a back support.
4. Turn off two bolts and remove a support from the central longeron. Remove the torsion (on cars from the manual transmission).
5. Carefully check existence of signs of wear or destructions on all details of a support, replace the damaged details.
6. Establish a back support on a longeron and tighten bolts.
7. Establish an arm of a back support and tighten bolts.
8. Combine a back support with an arm, insert a coupling bolt and tighten a nut with the set moment.
9. Lower the car.
10. Connect the battery to weight.