65637bd9

12.8.3. Bars

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and establish on supports.
2. Remove a wheel.
3. Turn off a bar nut on the case of a nave and remove a washer.
4. Turn off a nut (it is specified by shooters) bars on an arm of a body and remove a bar.

Check

PERFORMANCE ORDER
1. Check a bar and plugs.
2. Bars change only assembled with plugs.

Installation

PERFORMANCE ORDER
1. Install a bar on a hairpin in the case of a nave and screw a new nut.
2. Establish a bar on an arm, pass a bolt and screw a new nut.
3. Establish a wheel and lower the car.
4. Roll the car forward and back, shake up – down.
5. Tighten all nuts with the set moment.