65637bd9



6.3.1.13.5. Air stream sensor


The sensor of a stream of air is installed behind the case of a butterfly valve.

Removal and installation

PERFORMANCE ORDER
1. Before its removal, disconnect a wire of the negative plug of the accumulator.
2. Access to the sensor will be significantly improved if to remove the air filter (see subsection 6.3.1.2).
3. Disconnect the connection socket from the air stream sensor.
4. Turn off three fixing screws, then, remove the sensor from the case of a butterfly valve and remove its sealing ring.
5. Installation is carried out upside-down removals.
6. At installation use a new sealing ring and reliably tighten fixing screws.