65637bd9



6.3.1.13.6. Electromagnetic valve of bystry operation of the engine


The electromagnetic valve of bystry operation of the engine (the idling mode) is installed on the right side of the case of a butterfly valve.

Removal and installation

PERFORMANCE ORDER
1. Before its removal, disconnect a wire of the negative plug of the accumulator.
2. If it is necessary, remove the air filter (see subsection 6.3.1.2), for improvement of access to the valve.
3. Walk along wires of the electromagnetic valve to the socket of connection and disconnect it
4. Unscrew the electromagnetic valve from the case of a butterfly valve, remove a plunger, a spring and a sealing washer.
5. If the electromagnetic valve is replaced, it is necessary to get its wires from the connection socket.
6. If you do not want to disassemble the connection socket, the electromagnetic valve can be removed together with a fuel injector and the additional valve of air supply.
7. Installation is carried out upside-down removals.
8. Check that the plunger and a spring were correctly established.